Bald Caps

Mix with cold water to create a cream which, when applied to the skin, will solidify and create a perfect negative copy. Mixing = 1 minute. Working = 2 minutes. Setting = 3 minutes.

Kryolan Bald Cap is made of Rubber and is pre tinted coming in small and large fitting. When applied you may need to re shape. Do this with scissors and Acetone.

 

When fitted you will need to glue down the edges with a spirit gum. If for close up work use a matt spirit gum. If not, a general spirit gum can be used. Do not use a latex product as this will cause a build up. Make-up can be applied. You would need to use a special grease product with a powder. If sprayed with a fixier spray, water based products can be used. If when you go to use a bald cap it has creases where it has been packed these can be removed with a hand hairdryer or by putting in hot water.

Kryolan Bald Cap is made of Glatzan and is semi transparent, a standard fitting.

 

When applied you may need to re shape. Do this with scissors and Acetone.

 

When fitted you will need to glue down the edges with a spirit gum. If for close up work use a matt spirit gum. If not, a general spirit gum can be used. Do not use a latex product as this will cause a build up. Make-up can be applied. You would need to use a special grease product with a powder. If sprayed with a fixier spray, water based products can be used. If when you go to use a bald cap it has creases where it has been packed, these can be removed with a hand hairdryer or by putting in hot water.

Excellent ready-made Glatzan caps. Kryolan Bald Cap is made of Glatzan and is semi transparent, a standard fitting.

 

When applied you may need to re shape. Do this with scissors and Acetone.

 

When fitted you will need to glue down the edges with a spirit gum. If for close up work, use a matt spirit gum. If not, a general spirit gum can be used. Do not use a latex product as this will cause a build up. Make-up can be applied. You would need to use a special grease product with a powder. If sprayed with a fixier spray, water based products can be used. If when you go to use a bald cap it has creases where it has been packed these can be removed with a hand hairdryer or by putting in hot water.

Vinyl plastic solution for easy manufacture of bald caps. Glatzan should be applied with a bristle brush onto the Plastic Head Black. Apply 3 to 5 coats, let dry and powder before peeling off

Vinyl plastic solution for easy manufacture of bald caps. Glatzan should be applied with a bristle brush onto the Plastic Head Black. Apply 3 to 5 coats, let dry and powder before peeling off

Matt version of Glatzan to be applied as final coat to achieve a matt effect.

Should be applied thinly and uniformly by brush as the last layer on thoroughly dried Glatzan L.

Highly flammable.

Matt version of Glatzan to be applied as final coat to achieve a matt effect.

Should be applied thinly and uniformly by brush as the last layer on thoroughly dried Glatzan L.

Highly flammable.

Kryolan Glatzan Thinner 1000ml As the name suggests it thins Glatzan to a thinner consistancy to help it brush on easier

As the name suggests ideal for use when making moulds as the cap is much thinner. Comes in large and small.

Head shaped block on which to make bald caps.

Kryolan Bald Cap is made of Rubber and is pre tinted coming in small and large fitting.

 

When applied you may need to re shape. Do this with scissors and Acetone.

 

When fitted you will need to glue down the edges with a spirit gum. If for close up work use a matt spirit gum. If not, a general spirit gum can be used. Do not use a latex product as this will cause a build up. Make-up can be applied. You would need to use a special grease product with a powder. If sprayed with a fixier spray, water based products can be used. If when you go to use a bald cap it has creases where it has been packed these can be removed with a hand hairdryer or by putting in hot water.

This kit contains the following: Cap, 5-colour make-up palette, colour set powder, powder puff, spirit gum, spirit gum remover, latex foam wedge, latex, stipple sponge and step by step instructions The Bald Cap is made of Rubber and is pre tinted coming standard fitting. When applied you may need to re shape do this with scissors and Acetone When fitted you will need to glue down the edges with a spirit gum. If for close up work use a matt spirit gum, if not a general spirit gum can be used. Do not use a latex product as this will cause a build up. Make-up can be applied. You would need to use a special grease product with a powder. If sprayed with a fixier spray water based products can be used. If when you go to use a bald cap it has creases where it has been packed these can be removed with a had hairdryer or putting in hot water.

Mehron Latex Bald Cap

A transparent elastic plastic bald cap for one-time use.

Extreme hair flattener. For use with bald caps. Good for using to shape the hair, especially for body painting. It dries hard and will wash out with shampoo.

Extreme hair flattener. For use with bald caps. Good for using to shape the hair, especially for body painting. It dries hard and will wash out with shampoo.

This product is made of natural latex for a perfect fit. Used by professionals the world over.